Home | 简体中文 | 繁体中文 | 杂文 | Search | ITEYE 博客 | OSChina 博客 | Facebook | Linkedin | 作品与服务 | Email

14.4. Example

14.4.1. Master

例 14.1. piranha master

			
[root@lvs1 ~]# cat /etc/sysconfig/ha/lvs.cf
serial_no = 31
primary = 172.16.0.2
primary_private = 172.16.2.2
service = lvs
backup_active = 1
backup = 172.16.0.3
backup_private = 172.16.2.3
heartbeat = 1
heartbeat_port = 539
keepalive = 2
deadtime = 6
network = direct
debug_level = NONE
monitor_links = 0
syncdaemon = 0
virtual LVS-HTTP {
     active = 1
     address = 172.16.0.1 eth0:1
     vip_nmask = 255.255.255.255
     port = 80
     send = "GET / HTTP/1.0\r\n\r\n"
     expect = "HTTP"
     use_regex = 0
     load_monitor = none
     scheduler = wlc
     protocol = tcp
     timeout = 6
     reentry = 15
     quiesce_server = 0
     server Web1 {
         address = 172.16.0.5
         active = 1
         port = 80
         weight = 2
     }
     server Web2 {
         address = 172.16.0.6
         active = 1
         port = 80
         weight = 2
     }
     server Web3 {
         address = 172.16.0.7
         active = 1
         port = 80
         weight = 2
     }
     server Web4 {
         address = 172.16.0.8
         active = 0
         port = 80
         weight = 0
     }
}
			
			

14.4.2. Slave

例 14.2. piranha slave

			
serial_no = 30
primary = 172.16.0.2
primary_private = 172.16.2.2
service = lvs
backup_active = 1
backup = 172.16.0.3
backup_private = 172.16.2.3
heartbeat = 1
heartbeat_port = 539
keepalive = 2
deadtime = 6
network = direct
debug_level = NONE
monitor_links = 0
syncdaemon = 0
virtual LVS-HTTP {
     active = 1
     address = 172.16.0.1 eth0:1
     vip_nmask = 255.255.255.255
     port = 80
     send = "GET / HTTP/1.0\r\n\r\n"
     expect = "HTTP"
     use_regex = 0
     load_monitor = none
     scheduler = wlc
     protocol = tcp
     timeout = 6
     reentry = 15
     quiesce_server = 0
     server Web1 {
         address = 172.16.0.5
         active = 1
         port = 80
         weight = 2
     }
     server Web2 {
         address = 172.16.0.6
         active = 1
         port = 80
         weight = 2
     }
     server Web3 {
         address = 172.16.0.7
         active = 1
         port = 80
         weight = 2
     }
     server Web4 {
         address = 172.16.0.8
         active = 0
         port = 80
         weight = 3
     }
}
			
			

14.4.3. MySQL

virtual SLB-MySQL {
     active = 1
     address = 172.16.1.50 eth0:2
     vip_nmask = 255.255.255.255
     port = 3306
     persistent = 30
     send = ""
     expect = ""
     use_regex = 0
     load_monitor = none
     scheduler = wlc
     protocol = tcp
     timeout = 5
     reentry = 15
     quiesce_server = 0
     server MySQL1 {
         address = 172.16.1.46
         active = 1
         port = 3306
         weight = 1
     }
     server MySQL2 {
         address = 172.16.1.47
         active = 1
         port = 3306
         weight = 1
     }
     server MySQL3 {
         address = 172.16.1.48
         active = 1
         port = 3306
         weight = 1
     }

}
			
# cat /srv/script/lvs-client-start

#!/bin/bash
### Disable IP_Forward in Linux Kernel ###
echo 0 > /proc/sys/net/ipv4/ip_forward

### Disable ARP Reponse on This RealServer ###
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

### Add VIP Address and Route ###
VIP=172.16.1.50

/sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up
/sbin/route add -host $VIP1 dev lo:0
			

我比较喜欢使用ip命令代替route命令

ip route add $VIP dev lo:0 src $VIP

comments powered by Disqus